K: robotska kosilnica
- Ustvarjalec teme McGiver
- Začetni datum
Kaj je z njimi? Zraven dobiš šablono in navodila, kako položiti žico za odprte 90 (to so potem verjetno 270st ) in več stopinjske kote. Malo težje gre edino, če je v kotu tudi klančina, potem z originalnimi kolesi zna razriti teren. Ampak za Worxa spet dobiš bodisi terenske gume, bodisi špice.
Boljše, ni treba nič po aplikaciji risat, ker itak potem čisto natančno spet ne moreš narisati
Tu položiš magnetni trak okoli vsega, česar nočeš da pokosi.
Off limits - Izven meja | Trior
WA0863 - Dodatni modul, ki vsebuje magnetni trak, s katerim določimo območje košnje. Združljivo z: WR130E / WR141E / WR142E / WR143E / WR153E / WR155E Uporablja se namesto mejne
www.akumulatorskoorodje.si
No ja, 150€ je Off limits modul in ne trak.. Ne vem če ga dobiš zraven, ampak 20m magnetnega traku originalen Worx je 70€, lahko pa kupiš "aftermarket" za par €. Kakorkoli obrneš, še vedno je to ceneje, kot pa dodati zraven "dumb" kosilnice še 1500€ zato, da boš hodil za kosilnico in obvozil rožice, za kar boš potreboval več časa in še manj natančno bo Mojih 5c. Vsakemu svoje, ampak marsikdaj je tehnologija tudi bolj zakomplicirala delo, kot pa poenostavila.
Mojih 5c. Vsakemu svoje, ampak marsikdaj je tehnologija tudi bolj zakomplicirala delo, kot pa poenostavila.
Bilo je mišljeno sarkastično.
Poglej malo nazaj mojo situacijo - cone, prehodi, ločene cone, otoki … in precej razgibano, pa še otoki se skozi leto spreminjajo. Ne da se ne da - je pa “nerodno”.
Saj na drugi lokaciji laufa husa 315 - in moram drugi teden “dodati” novo področje in otok narest. Žica je že doma, sponke in hakli tudi - bo pa časvno vzelo “duplo” več časa kot z GPSom - a dejansko to ni težava, saj tega ne počnem na tedenski bazi.
Vsekakor ima svoje pluse, niso pa to tako zelo veliki plusi. Nerodno je, ker se postavljaš v situacijo s husqwarno, ker ne premore nekih pametnih dodatkov za takšne situacije. Na podlagi husqwarne te zato razumem in bi tudi jaz z obema rokama pograbil lubo.
Ni blo to - naklon me je na Lubo napeljal.
Priznam pa, da sem Worx mogočr premalo podrobno pogledal.
Priznam pa, da sem Worx mogočr premalo podrobno pogledal.
Spremembe lokacije žice, še posebej če kline zabijaš, prvo ven, nato spet not.
damirj
Daj link do aftermarket off-limits traku.
Pa dobro to nardiš prvič, če si kaj zajebal. Jaz že 7 let nisem premikal žice na 80% terena. Dodal sem par kvadratov terena, ki se po novem kosi to pa je to.
Kaj to 3x letno parcele spreminjate prodajate pa kupujete al kje je problem s tem premikanjem? Če dam neko novo drevo naj se not zaletava. Sem dodal otroška igrala, se lepo zaletava, sem dodal visoko gredo se zaletava, ... itd. Vse pa tudi ne rabi bit z žico obdelano.
Če je kaj nežnega, kaka nova sadika tanka, zabijem 4 kole okoli dokler ne ojača in gremo dalje.
Kaj to 3x letno parcele spreminjate prodajate pa kupujete al kje je problem s tem premikanjem? Če dam neko novo drevo naj se not zaletava. Sem dodal otroška igrala, se lepo zaletava, sem dodal visoko gredo se zaletava, ... itd. Vse pa tudi ne rabi bit z žico obdelano.
Če je kaj nežnega, kaka nova sadika tanka, zabijem 4 kole okoli dokler ne ojača in gremo dalje.
Zadnjič ti je auto-update zmešal lubo 2 med košnjo, se jih ne da izklopiti ?
RTK postajo ti je tudi updejtal ?
Jo dodaš v aplikaciji kot lubo, samo dosti blizu moraš biti.
In po updejtu pravijo naj bi ugasnil lubo&rtk izštekal iz elektrike ter spet prižgal, torej auto-update ni prav nič preverjal, če je to sploh primeren čas za update (ni bil sploh).
Ni sploh opcije “autoupdate” - ker autoupdate sploh ne obstaja.
V aplikaciji javi, da je update na razpolago - in moraš update pognati.
Meni je RTK “izklopilo”, ker ne zaznala, da obstaja update (pitaj boga kdo in kje je zahebal v logiki - ker ob prvem updatu RTK tega obnašanja ni bilo) - in ja, imam RTL dodano v aplikacijo, saj drugače sploh vedel ne bi, da obstaja update.
So pa take “neumnosti” rezultat hitrega razvoja in nekoordiniranega dela dev timov - eni delajo na RTK, drugi na Lubi, tretji na appih - in če nimaš koga, ki usklajuje, imaš pa nekoga, ki pritiska, da morajo updati čimprej ven - imaš to, kar trenutno dela Mammotion - bin there, done that … v bistvu vsakodnevno doživljam.
Aja - ko, no, če bodo to osvojili, bo tudi cena zrasla … QA pač stane.
V aplikaciji javi, da je update na razpolago - in moraš update pognati.
Meni je RTK “izklopilo”, ker ne zaznala, da obstaja update (pitaj boga kdo in kje je zahebal v logiki - ker ob prvem updatu RTK tega obnašanja ni bilo) - in ja, imam RTL dodano v aplikacijo, saj drugače sploh vedel ne bi, da obstaja update.
So pa take “neumnosti” rezultat hitrega razvoja in nekoordiniranega dela dev timov - eni delajo na RTK, drugi na Lubi, tretji na appih - in če nimaš koga, ki usklajuje, imaš pa nekoga, ki pritiska, da morajo updati čimprej ven - imaš to, kar trenutno dela Mammotion - bin there, done that … v bistvu vsakodnevno doživljam.
Aja - ko, no, če bodo to osvojili, bo tudi cena zrasla … QA pač stane.
Update iz https://www.alter.si/tema/k-robotska-kosilnica.2585917/page-40#post-3561653
strojni prevod iz Fr
ter
->
Sporočilo iz fb skupine:
Luba Mammotion Groupe France
www.facebook.com
28.6 2024
strojni prevod iz Fr:
Hello everyone, this message to alert you! I have just had a rather unpleasant visit of a person presenting themselves as the frequency police with a vehicle worthy of the CIA. I checked the documents everything is true. This person demanded to enter my property because according to him I had frequency jammers in my property, he intervened at the request of Orange which said he had frequency scrambles on his antenna 300m from my home.
Initially, given the rather incredible situation I marked myself, then he asked me if I had a Luba2 mammotion in robotic mower. I replied yes, I have 2, he asked me to turn them off immediately otherwise he did not leave. He showed me the Pic de de de de de de de l'Anéne RTK which is 40 times higher than the authorized standards, Mammotion takes 40% bandwidth while only 1% is authorized. He did not move, so I had to turn off the 2 Luba2.
He took my contact details, told me that the investigating agency went around France from these waves and asked to turn off all Luba2 one after the other. Apparently I am the only one to have this robot on the Metropolis of the Grand Nancy, I can tell you that he was not laughing.
He then told me that Mammotion was aware and was going to change the waves from 40 to 20 % but the French state does not want more than 1 % (tako je določeno na ravni EU, ne samo za Francijo).
I may be one of the first but know that mammotion is aimed at.
I am especially disgusted that I have 2, I will contact Mammotion.
Let me know if you are several in this case?
slika iz teme, anfr agent
ali
strojni prevod iz Fr
ter
->
Sporočilo iz fb skupine:
Luba Mammotion Groupe France
Luba Mammotion Groupe France | Facebook
Le groupe Luba Mammotion Groupe France est destiné aux utilisateurs de Luba, quelque soit votre pays. Retrouvez les dernières informations, une assistance à l'installation, une entraide et conseil...
www.facebook.com
28.6 2024
strojni prevod iz Fr:
Hello everyone, this message to alert you! I have just had a rather unpleasant visit of a person presenting themselves as the frequency police with a vehicle worthy of the CIA. I checked the documents everything is true. This person demanded to enter my property because according to him I had frequency jammers in my property, he intervened at the request of Orange which said he had frequency scrambles on his antenna 300m from my home.
Initially, given the rather incredible situation I marked myself, then he asked me if I had a Luba2 mammotion in robotic mower. I replied yes, I have 2, he asked me to turn them off immediately otherwise he did not leave. He showed me the Pic de de de de de de de l'Anéne RTK which is 40 times higher than the authorized standards, Mammotion takes 40% bandwidth while only 1% is authorized. He did not move, so I had to turn off the 2 Luba2.
He took my contact details, told me that the investigating agency went around France from these waves and asked to turn off all Luba2 one after the other. Apparently I am the only one to have this robot on the Metropolis of the Grand Nancy, I can tell you that he was not laughing.
He then told me that Mammotion was aware and was going to change the waves from 40 to 20 % but the French state does not want more than 1 % (tako je določeno na ravni EU, ne samo za Francijo).
I may be one of the first but know that mammotion is aimed at.
I am especially disgusted that I have 2, I will contact Mammotion.
Let me know if you are several in this case?
slika iz teme, anfr agent
ali
edit2:
update
objavljeno 5 ur nazaj:
www.facebook.com
Hello everyone, good news, so I had the double update this morning of my 2 robots this morning and the 2 RTK antennas directly by mammotion.
The ANFR has just checked right now, there is big better compared to yesterday, we are still above standards but not far. The person of the ANFR has taken measures for 20 minutes, it should be done over an hour but the update changes a lot of things and will allow us to use our Luba without afraid of a visit and a mail of the ANFR if it is done at the national level!
So all those who sent me not nice messages yesterday, some of them, some resellers, you should rather thank me for stirring a bit of shit because it has changed things fairly quickly, you should have written to mammotion and Not to me , I was acting in our interest in everyone simply otherwise your robot was prohibited for sale if nothing changed.
In any case, the last update patch that I received apparently puts our robots in the standard or not far!
Hoping you all have the same update firmware!
The firmware that they installed me 1.11.10.645 for the RTK antenna and 1.11.511.425 for the robot
Take advantage of your Luba
update
objavljeno 5 ur nazaj:
Luba Mammotion Groupe France | Facebook
Le groupe Luba Mammotion Groupe France est destiné aux utilisateurs de Luba, quelque soit votre pays. Retrouvez les dernières informations, une assistance à l'installation, une entraide et conseil...
www.facebook.com
Hello everyone, good news, so I had the double update this morning of my 2 robots this morning and the 2 RTK antennas directly by mammotion.
The ANFR has just checked right now, there is big better compared to yesterday, we are still above standards but not far. The person of the ANFR has taken measures for 20 minutes, it should be done over an hour but the update changes a lot of things and will allow us to use our Luba without afraid of a visit and a mail of the ANFR if it is done at the national level!
So all those who sent me not nice messages yesterday, some of them, some resellers, you should rather thank me for stirring a bit of shit because it has changed things fairly quickly, you should have written to mammotion and Not to me , I was acting in our interest in everyone simply otherwise your robot was prohibited for sale if nothing changed.
In any case, the last update patch that I received apparently puts our robots in the standard or not far!
Hoping you all have the same update firmware!
The firmware that they installed me 1.11.10.645 for the RTK antenna and 1.11.511.425 for the robot
Take advantage of your Luba
