NOVE Posodobitve FW

nuvi 25x9 software version 7.30
as of March 10, 2015
(42.46 MB)

Changes made from version 6.30 to 7.30:
• Added support for the Garmin BC30 Wireless Backup Camera.
• Improved support for Historical Traffic.
• Improved performance while searching for POIs in a venue.
• Fixed possible issues with Direct Access and arrival mode.
• Fixed possible issues with map display and interaction.
• Fixed issues that could prevent the Where I've Been app from displaying travel history correctly.
• Fixed issues that could cause failures when importing GPX files.
• Fixed an issue that could prevent Yandex Traffic from being displayed in Russia.
• Fixed an issue that could prevent coordinate settings from saving correctly.
• Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=6799

nuvi 2xx7 and 2xx8 software version 4.70
as of March 9, 2015
(46.47 MB)

Changes made from version 4.60 to 4.70:

◦Added support for the Garmin BC30 Wireless Backup Camera.
◦Added support for calculating longer routes.
◦Added support for the Farsi language.
◦Fixed display layout and text formatting issues.
◦Improved ASR.
◦Improved map display performance in heavy traffic situations.
◦Updated translations.
◦Added the ability to delete multiple trips using a checklist.
◦Improved software stability.

Zumo 590 Firmware versie 3.10


Changes made from version 2.80 to 3.10:

Added Dynamic Fuel Stops feature.
Improved Garmin Express support.
Improved performance of InstaSearch suggestions.
Added the ability to search a multi-route trip.
Improved the user experience for incoming calls.
Fixed an issue that could cause the GPS signal to be lost in mountainous areas.
Fixed an issue that could cause the active route to be terminated.
Fixed an issue that could cause the itinerary to display incorrectly.
Fixed an issue that could cause excessive search results.
Improved software stability.

zumo 590 Text Translations software version 1.40
as of March 26, 2015
(1.79 MB)

Changes made from version 1.30 to 1.40:
◦ Improved Text Translations

http://www8.garmin.com/support/download_details.jsp?id=8931



nuvi 25x9 software version 7.50
as of April 27, 2015
(42.50 MB)

Changes made from version 7.30 to 7.50:
◦ Added support for processing traffic events outside of TMC road coverage.
◦ Fixed possible display issues with traffic camera images in photoLive.
◦ Fixed a possible display issue with POI photos.
◦ Improved software stability.

http://download.garmin.com/software/nuvi25x9_750.gcd
http://www8.garmin.com/support/download_details.jsp?id=6799

dezl 570 software version 3.30
as of April 20, 2015
(39.24 MB)

Change History
Changes made from version 3.20 to 3.30:
• Fixed an issue that could cause POI bubbles to appear inconsistently.
• Fixed an issue that could prevent the multi-route preview from showing multiple routes.

http://www8.garmin.com/support/download_details.jsp?id=7345



dezl 770 software version 3.30
as of April 20, 2015
(59.76 MB)

Change History
Changes made from version 3.20 to 3.30:
• Fixed an issue that could cause POI bubbles to appear inconsistently.
• Fixed an issue that could prevent the multi-route preview from showing multiple routes

http://www8.garmin.com/support/download_details.jsp?id=7267

nuvi 26x9 software version 7.50
as of April 27, 2015
(88.39 MB)

Change History
Changes made from version 7.30 to 7.50:
◦ Added support for processing traffic events outside of TMC road coverage.
◦ Fixed possible display issues with traffic camera images in photoLive.
◦ Fixed a possible display issue with POI photos.
◦ Improved software stability.

http://download.garmin.com/software/nuvi26x9_750.gcd
http://www8.garmin.com/support/download_details.jsp?id=7141



nuvi 27x9 software version 7.50
as of April 27, 2015
(55.85 MB)

Change History
Changes made from version 7.30 to 7.50:
◦ Added support for processing traffic events outside of TMC road coverage.
◦ Fixed possible display issues with traffic camera images in photoLive.
◦ Fixed a possible display issue with POI photos.
◦ Improved software stability.

http://download.garmin.com/software/nuvi27x9_750.gcd
http://www8.garmin.com/support/download_details.jsp?id=7351

Rino6xx (WebUpdater) software version 4.20
as of April 15, 2015
(8.61 MB)

Change History
Changes made from version 4.10 to 4.20:
￭ Fixed possible shutdown when scrolling through the waypoints list
￭ Improved low power battery charging mode

http://download.garmin.com/software/Rino6xx_WebUpdater__420.gcd
http://www8.garmin.com/support/download_details.jsp?id=5525



Fenix3 software version 3.20
as of April 17, 2015
(2.09 MB)

Change History
Changes made from version 3.10 to 3.20:
￭ Added Hot Keys press-and-hold START and BACK key customization (Settings > System > Hot Keys).
￭ Added Back to Start option for straight-line navigation back to activity start.
￭ Improved Connect IQ stability.
￭ Improved pace stability at low speeds.
￭ Fixed issue with import of elevation of saved locations from GPX files.
￭ Fixed issue with display of 3 digit speeds on ski data pages.
￭ Fixed potential device lockup when exiting watch mode.

http://download.garmin.com/software/Fenix3_320.rgn
http://www8.garmin.com/support/download_details.jsp?id=7623

Edge® 510 software version 3.62 Beta
as of April 24, 2015
(8.12 MB)

Change History
Changes made from version 3.50 to 3.62:
● Fixed an issue where segments were sometimes being cancelled for going off segment when the user was still on or near the segment.
● Fixed an issue where the auto pause feature was not correctly pausing the timer when the user stops moving.
● Fixed an issue where segments which were disabled on the device were being reset to enabled if the leader board was updated by Garmin Connect.

https://forums.garmin.com/showthread.php?242210-Edge-510-software-version-3-62-Beta
http://www8.garmin.com/support/download_details.jsp?id=8867

Changes made from version 3.40 to 3.50:
More info at » http://www8.garmin.com/support/download_details.jsp?id=6049



Edge® 810 software version 3.62 Beta
as of April 24, 2015
(8.63 MB)

Change History
Changes made from version 3.60 to 3.62:
● Fixed an issue where turn prompts where not always being displayed for valid turns on course routes.
● Fixed an issue where the auto pause feature was not correctly pausing the timer when the user stops moving.
● Fixed an issue where segments which were disabled on the device were being reset to enabled if the leader board was updated by Garmin Connect.

https://forums.garmin.com/showthread.php?242213-Edge-810-software-version-3-62-Beta
http://www8.garmin.com/support/download_details.jsp?id=7574

Changes made from version 3.40 to 3.60:
More info at » http://www8.garmin.com/support/download_details.jsp?id=6005

dezl 760 (GCD file) software version 5.10
as of April 27, 2015
(66.81 MB)

Change History
Changes made from version 5.00 to 5.10:
· Improved software text translations
· Improved FMI and HOS features
· Fixed issues that affected ASR
· Fixed an issue that could prevent Natural Guidance from working
· Fixed an issue that could prevent photoLive from working
· Fixed issues that could affect routing
· Fixed an issue that could prevent weigh station notifications from appearing
· Fixed an issue that could prevent drive profiles from erasing after a master reset

Changes made from version 4.90 to 5.00:
· Fixed an issue that could cause HOS logging to display incorrectly.
· Reverted weekly reset rule per 2014 FMCSA regulations update.

http://download.garmin.com/software/dezl760_GCDfile__510.gcd
http://www8.garmin.com/support/download_details.jsp?id=5883

nuviCam software version 2.20
as of April 23, 2015
(54.26 MB)

http://download.garmin.com/software/nuviCam_220.gcd
http://www8.garmin.com/support/download_details.jsp?id=7711



nuviCam Camera Firmware software version 2.20
as of April 23, 2015
(19.91 MB)

http://download.garmin.com/software/nuviCamCameraFirmware_220.gcd
http://www8.garmin.com/support/download_details.jsp?id=7715



nuvi 2798 software version 4.80
as of March 25, 2015
(58.28 MB)

Change History
Changes made from version 4.70 to 4.80:
· Fixed an issue that could cause search results to list some street names without spaces.

http://www8.garmin.com/support/download_details.jsp?id=6983

nuvi 2xx7 and 2xx8 C4 software version 7.50
as of April 27, 2015
(40.29 MB)

Change History
Changes made from version 7.30 to 7.50:
· Added support for processing traffic events outside of TMC road coverage.
· Fixed possible display issues with traffic camera images in photoLive.
· Fixed a possible display issue with POI photos.
· Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7561



nuvi 25x9 C4 software version 7.50
as of April 27, 2015
(40.60 MB)

Change History
Changes made from version 7.30 to 7.50:
· Added support for processing traffic events outside of TMC road coverage.
· Fixed possible display issues with traffic camera images in photoLive.
· Fixed a possible display issue with POI photos.
· Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7563



nuvi 26x9 C4 software version 7.50
as of April 27, 2015
(86.52 MB)

Change History
Changes made from version 7.30 to 7.50:
· Added support for processing traffic events outside of TMC road coverage.
· Fixed possible display issues with traffic camera images in photoLive.
· Fixed a possible display issue with POI photos.
· Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7585

Edge 1000 software version 3.00
as of April 28, 2015
(18.54 MB)

Change History
Changes made from version 2.80 to 3.00:
• New feature! Added the ability to update sensor software on supporting sensors which includes Vector power and HRM-Run sensors.
• New feature! Added the ability to configure Vector features. Turning off the Cycling Dynamics setting will help to extend Vector battery life. To do so, select Settings > Sensors > [your Vector sensor] > Sensor Details > Vector Features > Cycling Dynamics.
• Due to the previous change, cycling dynamics, torque effectiveness and pedal smoothness capabilities for supporting Vector power sensors will need to be re-enabled. These new settings can be found in the Settings > Sensors > [your Vector sensor] > Sensor Details > Vector Features menu.
• New feature! Added the ability to pair Vector S and Vector 2S pedals to a Vector upgrade pedal.
• Improved the accuracy of the ascent and descent calculations.
• Fixed bug preventing downloading training plans over Wi-Fi.
• Fixed bugs and made improvements to the Elevation graph page.
• Improved turn guidance instructions.
• Fixed issue where parts of map files would not load. This issue could be seen on devices that contained large map files such as the GB Discoverer Premium 1:25K maps.

http://www8.garmin.com/support/download_details.jsp?id=6735

vivosmart software version 3.20
as of May 5, 2015
(260 KB)

Change History
Changes made from version 3.10 to 3.20:
• New Feature: User can respond to notifications if phone allows. Swipe left when scrolling through notifications to access.
• Save Move status through power cycle or charging.
• Improve reconnecting to ANT sensors after pausing activity.
• As long as Step Goal is reached, calculate new Step Goal even if the device was on the charger for part of the day.
• Other small bug fixes.

http://www8.garmin.com/support/download_details.jsp?id=7285



Vivoactive software version 2.80
as of March 25, 2015
(2.09 MB

Change History
Changes made from version 2.70 to 2.80:
• Added new settings to control the intensity of vibrations.
• Added the ability to cache the most recently played Golf course and play it again without needing a phone connection.
• Fix an issue that caused long activities to not upload immediately.
• Added a new fireworks page to congratulate the user on achieving his daily step goal.
• More fixes to improve battery life and other minor improvements/bug fixes.

http://www8.garmin.com/support/download_details.jsp?id=7591



VivoActive,Fenix3 ANT software version 2.90
as of May 5, 2015

Serial Port
(262 KB)

USB Card Programmer
(262 KB)

Change History
Changes made from version 2.60 to 2.70:
• Battery Life Improvements when connected to a smart phone.

http://www8.garmin.com/support/download_details.jsp?id=7663

echoMAP with SD Card software version 2015.0504
as of May 4, 2015
(120.92 MB)

Change History

Changes made from version 2015.0330 to 2015.0504:
◦ echoMAP 42dv/43dv/44dv/45dv: 2.60
◦ echoMAP 52dv/53dv/54dv/55dv: 2.60
◦ echoMAP 72sv/73sv/74sv/75sv: 2.60
◦ echoMAP 73dv: 2.60
◦ echoMAP 92sv/93sv/94sv/95sv: 2.60
◦ echoMAP 70s/70dv: 4.50
◦ echoMAP 50s/50dv: 4.50
◦ Panoptix PS-30/PS-31: 2.20

http://www8.garmin.com/support/download_details.jsp?id=4749
http://download.garmin.com/software/echoMAPwithSDCard_20150504.exe

GPSMAP Series with SD Card software version 2015.0504
as of May 4, 2015
(850.33 MB)

Change History
Changes made from version 2015.0330 to 2015.0504:
◦ GPSMAP 8008/8012/8015/8500/8208/8212/8215/8530: 5.50
◦ Volvo Penta Glass Cockpit System: 5.50
◦ GPSMAP 7407/7408/7410/7412/7416/7607/7608/7610/7612/7616: 5.50/2.50
◦ GPSMAP 820/840/1020/1040: 4.50
◦ GPSMAP 721/741/751: 4.50
◦ GPSMAP 527/547/557: 4.50
◦ GHP Reactor Hydraulic: 2.70
◦ GHP Reactor w/ SmartPump: 2.70
◦ GHP Reactor Mechanical/Retrofit/Solenoid: 2.70
◦ GHP Reactor for Viking VIPER: 2.70
◦ GHP Reactor for Volvo-Penta: 2.70
◦ GHP Reactor for Yamaha Helm Master: 2.70
◦ GHP Reactor for Steer-by-wire: 2.70
◦ GHC 20: 3.30
◦ GNX 120/130: 2.10
◦ GMI 20: 2.40
◦ GSD 25: 2.50
◦ GSD 26: 3.10
◦ Volvo Autopilot Display: 2.20
◦ Panoptix PS-30/PS-31: 2.20

http://www8.garmin.com/support/download_details.jsp?id=8743
http://download.garmin.com/software/GPSMAPSerieswithSDCard_20150504.exe

Vector software version 3.50
as of April 24, 2015

Use Vector Updater to install this file.
(130 KB)

Change History
Changes made from version 2.71 to 3.50:
· Added rider position determination (Seated/Standing) cycling dynamic when connected to a compatible Garmin display [dual sensing Vector 1 and 2 systems only].
· Made static offset calibration time constant; it will always take 5 seconds if successful.
· Enabled pairing and unpairing of Vector S and 2S pedals from a compatible Garmin display.
· Improved speed of connecting to pedals for firmware upgrade from a compatible Garmin display.
· Improved initiation of cycling dynamics from a compatible Garmin display [dual sensing Vector 1 and 2 systems only].
· Allow TE/PS to be enabled or disabled on compatible Garmin display devices [dual sensing Vector 1 and 2 systems only].
· Fixed issue where the install angles were not properly being reset when unplugging the spindle or when commanded by a compatible Garmin display.
· Various fixes to address issues related to calibration errors, left pedal drop outs and poor TE/PS data.

http://www8.garmin.com/support/download_details.jsp?id=5713



Vector S software version 3.50
as of April 24, 2015

Use Vector Updater to install this file.
(130 KB)

Change History
Changes made from version 2.71 to 3.50:
· Added rider position determination (Seated/Standing) cycling dynamic when connected to a compatible Garmin display [dual sensing Vector 1 and 2 systems only].
· Made static offset calibration time constant; it will always take 5 seconds if successful.
· Enabled pairing and unpairing of Vector S and 2S pedals from a compatible Garmin display.
· Improved speed of connecting to pedals for firmware upgrade from a compatible Garmin display.
· Improved initiation of cycling dynamics from a compatible Garmin display [dual sensing Vector 1 and 2 systems only].
· Allow TE/PS to be enabled or disabled on compatible Garmin display devices [dual sensing Vector 1 and 2 systems only].
· Fixed issue where the install angles were not properly being reset when unplugging the spindle or when commanded by a compatible Garmin display.
· Various fixes to address issues related to calibration errors, left pedal drop outs and poor TE/PS data.

http://www8.garmin.com/support/download_details.jsp?id=7201



Vector 2 software version 3.50
as of April 24, 2015

Use Vector Updater to install this file.
(130 KB)

What's New? ...data not available.

http://www8.garmin.com/support/download_details.jsp?id=7669



Vector 2S software version 3.50
as of April 24, 2015

Use Vector Updater to install this file.
(130 KB)

What's New? ...data not available.

http://www8.garmin.com/support/download_details.jsp?id=7671





Vector Updater software version 3.2.0
as of April 23, 2015
(12.28 MB)

http://www8.garmin.com/support/download_details.jsp?id=6575



Vector Updater for Mac software version 3.2.0
as of April 23, 2015
(3.64 MB)

http://www8.garmin.com/support/download_details.jsp?id=6577

GPSMAP 695/696 software version 7.20
as of March 23, 2015
(4.01 MB)

Change History
Changes made from version 7.10 to 7.20:
• Improve SiriusXM METAR processing.
• Correct GDL 39 pass-through tuning support for VHF Out formats.
• Correct rounding issue when sending some frequencies to VHF radio.
• General improvements to system operation.
• Includes update to GDL 39 software version 4.40

http://www8.garmin.com/support/download_details.jsp?id=4359



GPSMAP 695/696 (SD card) software version 7.20
as of March 23, 2015
(6.05 MB)

Change History
Changes made from version 7.10 to 7.20:
• Improve SiriusXM METAR processing.
• Correct GDL 39 pass-through tuning support for VHF Out formats.
• Correct rounding issue when sending some frequencies to VHF radio.
• General improvements to system operation.
• Includes update to GDL 39 software version 4.40.

http://www8.garmin.com/support/download_details.jsp?id=5281



[ PDF ] GPSMAP® 695/696