NOVE Posodobitve FW

nuvi 25x9 software version 8.20
as of January 4, 2016
(41.51 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved creating and reviewing trips in Trip Planner.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=6799
http://gawisp.com/perry/nuvi/nuvi25x9_820.gcd



nuvi 25x9 C4 software version 8.20
as of January 4, 2016
(40.89 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7563
http://gawisp.com/perry/nuvi/nuvi25x9C4_820.gcd

nuvi 26x9 software version 8.20
as of January 4, 2016
(89.17 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved creating and reviewing trips in Trip Planner.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7141
http://gawisp.com/perry/nuvi/nuvi26x9_820.gcd



nuvi 26x9 C4 software version 8.20
as of January 4, 2016
(87.25 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved creating and reviewing trips in Trip Planner.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7585
http://gawisp.com/perry/nuvi/nuvi26x9C4_780.gcd

nuvi 27x9 software version 8.20
as of January 4, 2016
(56.40 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved creating and reviewing trips in Trip Planner.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7351
http://gawisp.com/perry/nuvi/nuvi27x9_820.gcd



nuvi 2xx7 and 2xx8 C4 software version 8.20
as of January 4, 2016
(40.50 MB)

Changes made from version 7.80 to 8.20:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added support for searching along multiple routes in a trip.
◦ Improved creating and reviewing trips in Trip Planner.
◦ Improved routing behavior in areas where vehicle access is restricted.
◦ Improved search performance.
◦ Fixed potential issues with reviewing traffic events.
◦ Fixed an issue with BC 30 that could occur after restoring default user settings.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7561
http://gawisp.com/perry/nuvi/nuvi2xx7and2xx8C4_820.gcd



nuvi 27x7 and 27x8 (GCD File) software version 5.20
as of January 4, 2016
(58.23 MB)

Changes made from version 5.10 to 5.20:
◦ Made the volume mixer available regardless of the state of paired phones.
◦ Fixed an issue where Australian state abbreviations were used instead of country abbreviations.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=5951
http://download.garmin.com/software/nuvi27x7and27x8_GCDFile__520.gcd



nuvi 2798 software version 5.20
as of January 4, 2016
(58.31 MB)

Changes made from version 5.10 to 5.20:
◦ Made the volume mixer available regardless of the state of paired phones.
◦ Fixed an issue where Australian state abbreviations were used instead of country abbreviations.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=6983
http://download.garmin.com/software/nuvi2798_520.gcd

Camper/RV 660 software version 3.40
as of January 5, 2016
(58.54 MB)

Changes made from version 3.30 to 3.40:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added warnings for propane tank restrictions in various states.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=9081
http://gawisp.com/perry/rv/Camper_RV660_340.gcd



RV and Camper 760 software version 5.20
as of January 4, 2016
(57.92 MB)

Changes made from version 5.10 to 5.20:
◦ Made the volume mixer available regardless of the state of paired phones.
◦ Fixed an issue where Australian state abbreviations were used instead of country abbreviations.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=6269
http://download.garmin.com/software/RVandCamper760_520.gcd
http://gawisp.com/perry/rv/RVandCamper760_520.gcd

nuviCam software version 3.10
as of January 5, 2016
(55.05 MB)

Changes made from version 3.00 to 3.10:
◦ Added support for the Garmin babyCam™ accessory.
◦ Added handling for areas with differing daytime and nighttime speed limits.
◦ Improved display of the current position when satellite reception is poor.
◦ Fixed an issue that caused the unit to shut down when using maps of China.
◦ Fixed an issue that could prevent the Where Am I page from showing the nearest intersection.
◦ Fixed an issue that could cause the current speed to display in red when not exceeding the speed limit.
◦ Fixed an issue that could prevent the unit from resuming from a suspended state when using an FMI-45 cable.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7711
http://gawisp.com/perry/nuvi/nuviCam_310.gcd



dezlCam software version 3.10
as of January 5, 2016
(55.84 MB)

Changes made from version 3.00 to 3.10:
◦ Added support for the Garmin babyCam™ accessory.
◦ Fixed an issue that could prevent the unit from resuming from a suspended state when using an FMI-45 cable.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7713
http://gawisp.com/perry/dezl/dezlCam_310.gcd

dezl 770 software version 4.40
as of January 5, 2016
(60.85 MB)

Changes made from version 4.30 to 4.40:
◦ Added support for the Garmin babyCam™ accessory.
◦ Changing either of the Hazardous Materials or Tunnel Restrictions settings in European truck profiles may necessitate changes to the other. The unit will now prompt for further changes to these settings as needed.
◦ Added Foursquare points of interest and direct access points of interest to the Trip Planner app.
◦ Changed rounding of odometer values in IFTA trip reports to tenths of a mile.
◦ Fixed an issue that could prevent the device from responding when calculating a route using shaping points.
◦ Fixed an issue that prevented the sunrise/sunset trip data field from updating.
◦ Fixed an issue with searching for rest areas using Up Ahead.
◦Fixed an issue that could prevent the unit from unlocking maps when using multiple SD cards containing the same map.
◦ Fixed an issue that prevented entering fractional truck profile measurements in Lithuanian.
◦ Fixed an issue that could prevent the unit from resuming from a suspended state when using an FMI-45 cable.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7267
http://gawisp.com/perry/dezl/dezl770_440.gcd

dezl 570 software version 4.40
as of January 5, 2016

Use Garmin Express to install this file.
(40.00 MB)

Changes made from version 4.30 to 4.40:
◦ Added support for the Garmin babyCam™ accessory.
◦ Changing either of the Hazardous Materials or Tunnel Restrictions settings in European truck profiles may necessitate changes to the other. The unit will now prompt for further changes to these settings as needed.
◦ Added Foursquare points of interest and direct access points of interest to the Trip Planner app.
◦ Changed rounding of odometer values in IFTA trip reports to tenths of a mile.
◦ Fixed an issue that could prevent the device from responding when calculating a route using shaping points.
◦ Fixed an issue that prevented the sunrise/sunset trip data field from updating.
◦ Fixed an issue with searching for rest areas using Up Ahead.
◦ Fixed an issue that could prevent the unit from unlocking maps when using multiple SD cards containing the same map.
◦ Fixed an issue that prevented entering fractional truck profile measurements in Lithuanian.
◦ Fixed an issue that could prevent the unit from resuming from a suspended state when using an FMI-45 cable.
◦ Improved software stability.

http://www8.garmin.com/support/download_details.jsp?id=7345

Forerunner 920XT software version 6.20
as of January 5, 2016
(2.09 MB)

Changes made from version 6.10 to 6.20:
◦ Added support for the latest running dynamics. These include: Ground Contact Time Balance, Stride Length, and Vertical Ratio (requires a new HRM-Run, the original HRM-Run with sw ver 6.60, or HRM-Tri with sw ver 4.20).
◦ Improved average stride length calculation.

http://www8.garmin.com/support/download_details.jsp?id=7249
http://download.garmin.com/software/Forerunner920XT_620.rgn



Forerunner 920XT software version 6.21 Beta
as of January 6, 2016

Download (2.16 MB)
http://www8.garmin.com/support/download_details.jsp?id=7627
http://download.garmin.com/software/Forerunner920XT_621Beta.zip

Changes made from version 6.20 to 6.21:
◦ Restored the version of the pool swim distance algorithm that was present in the 5.25 beta. This will improve distance accuracy for the users having problems with released software versions. We will continue to work on improving the pool swim algorithm in future betas.

Forerunner 235 software version 2.41 Beta
as of January 5, 2016

Download (160 KB)
http://www8.garmin.com/support/download_details.jsp?id=9921
http://download.garmin.com/software/Forerunner235_241Beta.zip

Changes made from version 2.40 to 2.41:
◦ Fixed an issue where the heart rate value could get stuck.

eTrex Touch 25/35 (Webupdater) software version 3.00
as of January 8, 2016
(17.40 MB)

Changes made from version 2.90 to 3.00:
• Fixed possible shutdown when reviewing POIs on the map

http://www8.garmin.com/support/download_details.jsp?id=9243
http://download.garmin.com/software/eTrexTouch25_35_Webupdater__300.gcd



fenix 3/tactix Bravo software version 6.52 Beta
as of January 8, 2016
(2.71 MB)

Changes made from version 6.42 to 6.52:
• Added support for CIQ 1.2.2.
• Added Intensity Minutes widget (Settings > Widgets). Note: requires a connection to a Heart Rate Strap to accrue Vigorous minutes.
• Restored support for the (optional) manual entry of Sleep mode (Settings > Activity Tracking).
• Fixed a potential issue with display of day/month on the watch face. (Requires display update 3.01)
• Fixed a potential issue with the vibration setting getting affected after a software update.
• Fixed a potential issue with the Floors climbed goal being reported as 0.
• Fixed a potential issue with the backlight coming on for Smart Notifications, after placing the watch in 'Do Not Disturb' mode.
• Fixed a potential issue where the unit would crash when using paddle sport activities within a multisport profile.
• Fixed an issue where steps were not showing up on the last sport widget for a walking activity.
• Made other minor UX bug fixes and improvements.

http://www8.garmin.com/support/download_details.jsp?id=9505
http://download.garmin.com/software/fenix3_tactixBravo_652Beta.zip

Vector software version 3.90
as of January 7, 2016
(131 KB)

Changes made from version 3.81 to 3.90:
◦ Correct accelerometer start-up error that was preventing meaningful data from being captured and reported
◦ Fixed a condition where Vector could cause a display to divide by zero when receiving torque data
◦ Install angle can be set in a pedal to pedal disconnected state.
◦ Improved battery monitoring to make it less susceptible to sampling noise
◦ Improved handling of parameter conflict between multiple displays
◦ Prevent users from setting scale factor outside of the 0.75 to 1.25 range

http://www8.garmin.com/support/download_details.jsp?id=5713
http://download.garmin.com/software/Vector_390.rgn



Vector S software version 3.90
as of January 7, 2016
(131 KB)

Changes made from version 3.81 to 3.90:
◦ Correct accelerometer start-up error that was preventing meaningful data from being captured and reported
◦ Fixed a condition where Vector could cause a display to divide by zero when receiving torque data
◦ Install angle can be set in a pedal to pedal disconnected state.
◦ Improved battery monitoring to make it less susceptible to sampling noise
◦ Improved handling of parameter conflict between multiple displays
◦ Prevent users from setting scale factor outside of the 0.75 to 1.25 range

http://www8.garmin.com/support/download_details.jsp?id=7201
http://download.garmin.com/software/VectorS_390.rgn

Vector 2 software version 3.90
as of January 7, 2016
(131 KB)

Changes made from version 3.81 to 3.90:
◦ Correct accelerometer start-up error that was preventing meaningful data from being captured and reported
◦ Fixed a condition where Vector could cause a display to divide by zero when receiving torque data
◦ Install angle can be set in a pedal to pedal disconnected state.
◦ Improved battery monitoring to make it less susceptible to sampling noise
◦ Improved handling of parameter conflict between multiple displays
◦ Prevent users from setting scale factor outside of the 0.75 to 1.25 range

http://www8.garmin.com/support/download_details.jsp?id=7669
http://download.garmin.com/software/Vector2_390.rgn



Vector 2S software version 3.90
as of January 7, 2016
(131 KB)

Changes made from version 3.81 to 3.90:
◦ Correct accelerometer start-up error that was preventing meaningful data from being captured and reported
◦ Fixed a condition where Vector could cause a display to divide by zero when receiving torque data
◦ Install angle can be set in a pedal to pedal disconnected state.
◦ Improved battery monitoring to make it less susceptible to sampling noise
◦ Improved handling of parameter conflict between multiple displays
◦ Prevent users from setting scale factor outside of the 0.75 to 1.25 range

http://www8.garmin.com/support/download_details.jsp?id=7671
http://download.garmin.com/software/Vector2S_390.rgn

Camper/RV 660 software version 3.50
as of January 13, 2016
(58.54 MB)

Changes made from version 3.40 to 3.50:
◦ Fixed an issue on devices purchased from Avtex retailers that prevented some campground POIs from displaying after a map update

http://www8.garmin.com/support/download_details.jsp?id=9081
http://download.garmin.com/software/Camper_RV660_350.gcd

D2 Bravo software version 2.70
as of January 11, 2016
(2.09 MB)

Changes made from version 2.50 to 2.70:
• Added support for Connect IQ SDK 1.2.1.
• Added ability to create Flight Plan (course) on device using saved locations, nearest airports, or entering ICAO identifier.
• Fixed WPT page to correctly update title for multipoint courses.
• Fixed WPT page to correctly update bearing.
• Improved CDI and off course behavior for flight plans.
• Fixed To/From arrow when flying past your destination.
• Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation).
• Added support for 'repeating' sports in a multisport profile (Settings > Apps > Multi Sport Profile > Repeat). This is useful for events such as 'Swimrun'. (https://en.wikipedia.org/wiki/Swimrun).
• Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature.
• Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
• Improved consistency and accuracy of altimeter auto calibration (performed during a GPS activity). Notes: GPS and manual calibration points will be used to determine the best overall calibration possible. A secondary step when acquiring a GPS fix at activity start will help denote a more accurate fix for altitude purposes (yellow to green ring indication). Settings > Sensors > Altimeter > Auto Cal. is now an On/Off setting as the 'Once' and 'Continuous' settings are no longer necessary. Use Settings > Sensors > Altimeter > Calibrate to calibrate the Altimeter to a known altitude.
• Improved altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: use Settings > Sensors > Altimeter > Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
• Improved vibration profiles to be differentiated based on alert type.
• Improved reliability of 'Weather' widget on iOS.
• Improved ability to detect time zone changes without a GPS fix (requires connection to Garmin Connect Mobile app and time set to 'Auto' on device, Settings > System > Time > Set Time).
• Improved activity tracking step calculation accuracy for certain use cases.
• Fixed potential issue with a Foot Pod sensor dropping out as a source for speed.
• Fixed an issue where key presses would not work, if a low battery notification was received when the unit was locked.
• Fixed potential issue with manual altimeter calibration during a GPS activity.
• Fixed issue with Tempe sensor connectivity.
• Fixed a potential issue with exiting the 'Find Phone' app.
• Fixed a potential issue with storm alerts not working in certain use cases.
• Fixed a potential issue with a Foot Pod sensor being incorrectly used as the source for distance accrual.
• Fixed issue with storing a large number of saved locations.
• Fixed potential issue with unexpected battery drain.
• Fixed potential issue reconnecting to ANT+ sensors.

http://www8.garmin.com/support/download_details.jsp?id=9185
http://download.garmin.com/software/D2Bravo_270.rgn

fenix 3/tactix Bravo software version 6.55 Beta
as of January 15, 2016

Download (2.71 MB)
http://www8.garmin.com/support/download_details.jsp?id=9505
http://download.garmin.com/software/fenix3_tactixBravo_655Beta.zip

Changes made from version 6.52 to 6.55:
• Added support for 'Auto Do Not Disturb'. (Power Menu > Do Not Disturb > Sleep Time) Sleep and wake up times can be setup through Garmin Connect Mobile.
• Fixed a potential issue where calorie counts were being over-reported after disconnecting from a heart rate strap.
• Fixed a potential issue where one could lose their daily accrued intensity minutes when power cycling the unit.
• Fixed a potential issue with Stride Length being over-reported.
• Fixed a potential issue with the unit rebooting after transferring Workouts from Garmin Connect.
• Fixed a potential issue with the record screen being blank after ending an activity.
• Made improvements to session average distance per stroke for Standup paddle boarding and Rowing.
• Fixed a potential issue with single sport profile creation.

nuvi 2xx7 and 2xx8 software version 5.30
as of January 20, 2016
(45.42 MB)

Changes made from version 5.20 to 5.30:
• Fixed an issue that prevented some traffic cables from being recognized.

http://www8.garmin.com/support/download_details.jsp?id=5949
http://download.garmin.com/software/nuvi2xx7and2xx8_530.gcd

fenix 3/tactix Bravo software version 6.63 Beta
as of January 22, 2016
(2.70 MB)

Changes made from version 6.55 to 6.63:
◦ Improved average stroke rate calculations for paddle sports.
◦ Fixed an issue where incorrect values for distance per stroke were being stored in paddle sports FIT files.
◦ Fixed a potential issue where the device might crash due to excessive flooding of smart notifications.
◦ Fixed a potential issue where device time would not update correctly, when crossing time zones and connected to the Garmin Connect Mobile app.
◦ Fixed a potential issue where uninstalling the current Connect IQ watch face from the Garmin Connect Mobile app would not work as expected.
◦ Fixed a potential issue where the performance condition alert could pop up while running a Connect IQ app.
◦ Fixed a potential issue where Recovery Advisor setting was not being respected.

http://www8.garmin.com/support/download_details.jsp?id=9505
http://download.garmin.com/software/fenix3_tactixBravo_663Beta.zip

Vivoactive software version 3.40
as of January 13, 2016
(2.09 MB)

Changes made from version 3.30 to 3.40:
• Fixed issue with delays in getting GPS fix introduced in 3.30.

http://www8.garmin.com/support/download_details.jsp?id=7591
http://download.garmin.com/software/Vivoactive_340.rgn



Forerunner 25 software version 3.10
as of January 21, 2016
(520 KB)

Changes made from version 3.00 to 3.10:
• Fixed an issue where some pixels occasionally became scrambled.

http://www8.garmin.com/support/download_details.jsp?id=9379
http://download.garmin.com/software/Forerunner25_310.rgn

vivosmart HR software version 2.90
as of January 26, 2016
(520 KB)

Changes made from version 2.60 to 2.90:
◦ Added a Heart Rate graph that can be viewed with a press on the Heart Rate Widget.
◦ Fixed an issue that always started the Heart Rate Widget with some default HR values. The Widget will now show the most recently recorded HR reading until it obtains a new valid reading.
◦ Added music controls widget to the activity training widget loop if the device is paired with a mobile device.
◦ Gesture based Backlight trigger is now enabled.
◦ Added support for 'Cardio' and 'Other' activity types.
◦ Added a new setting to control the display brightness on the device.
◦ Fixed a bug that reset HR values while the user is in a HR-broadcast session.
◦ Fixed a bug that enabled sleep tracking while the device is connected to a charger.
◦ Other bug fixes and improvements.

http://www8.garmin.com/support/download_details.jsp?id=9527
http://download.garmin.com/software/vivosmartHR_290.rgn

fenix 3/tactix Bravo software version 6.72 Beta
as of February 2, 2016

http://www8.garmin.com/support/download_details.jsp?id=9505
http://download.garmin.com/software/fenix3_tactixBravo_672Beta.zip

Download (2.71 MB)

Changes made from version 6.63 to 6.72:
• Added support for Speed/Pace and Heart Rate audio prompts. (Requires Garmin Connect Mobile App app version 3.2.1, select More > Settings > Device > Audio Prompts to configure)
• Improved list of app activities shown during navigation and interval training.
• Fixed an issue where users were seeing auto lap information during swim activities.
• Fixed potential issue with battery drain when using Analog watch faces. (Requires display update 3.11)