Brizgalni tiskalnik-katerega priporočate?

5. avg 2011
1.067
203
63
Okolica Ormoža
Iščem cenejši brizgalni tiskalnik za občasno tiskanje (cca 10 listov na mesec). Sedaj imam HP Desk Jet 2710e, star dobro leto, pa so se kartuše tako zasušile, da jih ni možno očistiti. Dve kartuši pa staneta več, kot je stal tiskalnik. Glede na izkušnje drugih uporabnikov bi rad našel kakšno boljšo varianto. Hvala vnaprej za predloge, ki temeljijo na izkušnjah. Filozofiranje me ne zanima.
 

MUC

Majstr
4. sep 2007
1.798
119
63
Tudi jaz imam tega in je super, ampak predvidevam, da avtor teme išče barvnega..
 

Gavran

direktor!
22. jul 2007
9.142
5.088
113
Nuku`Alofa
Iščem cenejši brizgalni tiskalnik za občasno tiskanje (cca 10 listov na mesec). Sedaj imam HP Desk Jet 2710e, star dobro leto, pa so se kartuše tako zasušile, da jih ni možno očistiti. Dve kartuši pa staneta več, kot je stal tiskalnik. Glede na izkušnje drugih uporabnikov bi rad našel kakšno boljšo varianto. Hvala vnaprej za predloge, ki temeljijo na izkušnjah. Filozofiranje me ne zanima.

Pri ink-jet tiskalnikih imaš dve možnosti - kartuše, ki imajo šobe vgrajene (tvoj primer) in tiste, ki imajo šobe in glave počene. Pri prvih so kartuše drage, ampak ko se zasuši itak menjaš vse. Pri drugih pa so kartuše poceni, če pa se zasuši glava, je tiskalnik za v smeti.
Jaz uporabljam Canon MG2950 z relativno dragimi kartušami, prej pa sem imel Epsona z ločenimi kartušami, ki je zaradi zasušene glave šel v smeti...
 

Samo Svoj

Guru
27. jan 2022
7.971
3.508
113
Uporabljam dva Canona TS5150 IN TR4650 s po dvema kartušama (trobarvna + črna) z integrirano glavo. Z enim tiskamo "vsake kvatre" z drugim 2-3X tedensko, zasušil se še ni nikoli noben.
Tiskalnika sta bila na akciji ranga 65-85€, komplet kartuš je 25+€ za nadomestna okoli 30€ za Canon oridžinale.
 

kajn

Guru
5. okt 2007
3.049
1.928
113
Iskajoč brata
Si lahko tudi jaz sposodim temo:
Včeraj me moj 12 letni canon spravil na obrate... pa mislim da je za v koš.
Gledam pa bolj tiskalnike na "flaške". Vem da je bil v štartu Epson vodilni, sedaj pa vidim da je tudi HP s takim polnjenjem.

Ali imate kaj izkušenj, so kaj problemi s temi tiskalniki?
 

Pepe

Guru
20. sep 2007
13.807
5.396
113
Od 2015 imam Epson L355. Po lastni statistiki je natisnil dobrih 20.000 strani, ker pri nas se kar tiska. Prišel je do stanja, ko epson svetuje, da se pogleda za novim ali mogoče (ni njihova prva opcija med rešitvami) na njihov servis, ker je poln rezervoar za odpadno črnilo. Dobil za kak € nove gobice, jih menjal, resetiral števec z WIC reset in dela naprej. Za črnilo nisem prav veliko zapravil. Zadnji nakup je bil še za okoli 6 - 7 € za 0,7 dcl barve. Barvna črnila sem doslej verjetno kupil dvakrat ali trikrat. Črnega je šlo malo več.
Ta printer je (bil) dovolj robusten, ko ga imaš, nek strošek ni.
Kaj se sedaj prodaja, ne poznam.
 

Fusionn

Guru
5. sep 2007
2.434
585
113
Iščem cenejši brizgalni tiskalnik za občasno tiskanje (cca 10 listov na mesec). Sedaj imam HP Desk Jet 2710e, star dobro leto, pa so se kartuše tako zasušile, da jih ni možno očistiti. Dve kartuši pa staneta več, kot je stal tiskalnik. Glede na izkušnje drugih uporabnikov bi rad našel kakšno boljšo varianto. Hvala vnaprej za predloge, ki temeljijo na izkušnjah. Filozofiranje me ne zanima.
za take primere sem jaz nabavil rabljen laserski tiskalnik. ko mu je praha zmanjkalo, je mislim, da bilo celo ceneje spet poiskat drugega na bolhi:))
 

kajpace

Guru
6. nov 2018
5.607
3.738
113
- za tvojim hrbtom...
hmpg.net
Si lahko tudi jaz sposodim temo:
Včeraj me moj 12 letni canon spravil na obrate... pa mislim da je za v koš.
Gledam pa bolj tiskalnike na "flaške". Vem da je bil v štartu Epson vodilni, sedaj pa vidim da je tudi HP s takim polnjenjem.

Ali imate kaj izkušenj, so kaj problemi s temi tiskalniki?
Poglej tega (še kje drugje, če je cenejši). Ima vse, kar rabiš:
 

guardy

Guru
3. avg 2007
8.560
1.146
113
Obišči stran
Brother. Ga imam sedaj že par let, printam občasno, se še ni zgodilo, da bi bilo kaj zapečeno. DCP-J105 model, osnovni all in one z wifi.
 

Ytbnd

Guru
2. mar 2010
17.174
6.135
113
Če je brizgalnik, potem se lahko zasuši glava, ne glede na to ali je na kartuše ali flaške.
Tam maks. 1x na 10 dni je dobro kaj natisniti (in sicer tako, da se tiska iz vseh barv, ponavadi so 4).
Ni potrebno, da je 100% velikost vzorca, lahko je samo 10-20% prvotne velikosti.

Prilagam dva vzorca.
 

Priponke

  • Colour-Test-Page.png
    Colour-Test-Page.png
    189,1 KB · Ogledi: 100
  • printer-barve.jpg
    printer-barve.jpg
    39,6 KB · Ogledi: 96
22. jul 2007
14.170
2.110
113
124
Potrebno je namestiti najnovejšo vdelano programsko opremo in spremeniti zasebno skrbniško geslo.
V večini primerov to zahteva orodje za posodobitev vdelane programske opreme (FIrware), če pa vas to ne vpraša, morate geslo spremeniti ročno.
Orodje za nadgradnjo vdelane programske opreme najdete tukaj: https://support.brother.com/g/b/dow...pt525w_eu&os=10068#SelectLanguageType-375_0_1 imenuje se orodje za posodobitev vdelane programske opreme.

Reactive Q&A: Brother Printer Vulnerabilities (June 2025)
Background
A recent article published on Korben.info has raised concerns about critical vulnerabilities
affecting Brother printers. These vulnerabilities are related to the Web Based Management
(WBM) interface used in many Brother devices. Brother has acknowledged these issues and
published a security advisory outlining the risks and mitigation steps.
LINKS FOR REFERENCE ONLY:
 SOURCE: https://www.rapid7.com/blog/post/multiple-brother-devices-multiple-
vulnerabilities-fixed/
https://www.techradar.com/pro/security/millions-of-brother-printers-threatened-by-multiple-
serious-vulnerabilities-enterprise-and-home-printers-at-risk
https://korben.info/brother-imprimantes-vulnerabilites-critiques.html
https://www.securityweek.com/new-vulnerabilities-expose-millions-of-brother-printers-to-
hacking/
Q1: What is the issue with Brother printers?
A: Brother has identified vulnerabilities in the Web Based Management (WBM) interface of
certain printer models. These could potentially allow unauthorized access or manipulation of
printer settings if the device is exposed to unsecured networks.
The full list of potentially affected models is here: CVE-2017-9765.pdf
Q2: Are European customers affected?
A: Yes, the vulnerabilities are not region-specific. Any Brother printer using the affected WBM
interface could be at risk if not properly secured. However, Brother has provided clear mitigation
steps to reduce or eliminate the risk.
This mitigation can be viewed here:
000 (LO to amend link as required)
Q3: What is Brother doing to address the issue?
A: Brother has released firmware updates for affected models and published detailed guidance
on securing devices. They recommend updating to the latest firmware and ensuring printers are
used within secure, firewall-protected networks.
Customers can use our firmware update tool here:
&orgc=gb&orglang=en&orgprod=group2&targetpage=18 (LO to amend link as required)
Q4: What should customers do to protect their devices?
A: Customers should:
 Update their printer firmware using Brother’s Firmware Update Tool.
 Change default login credentials for the WBM interface.

 Restrict access to the printer’s IP address to trusted devices only.
 Ensure the printer is behind a firewall or secure router.
Q5: Has any data been compromised?
A: There is no evidence that these vulnerabilities have been exploited or that any customer data
has been compromised. The vulnerabilities were responsibly disclosed and addressed
proactively by Brother.
Q6: Is this a new issue?
A: No, Brother has a history of addressing security vulnerabilities transparently. The current
advisory is part of their ongoing commitment to product security and customer safety.
Q7: Where can customers find more information?
A: Customers can visit Brother’s official Security Notification page for the latest updates and
guidance.
This mitigation can be viewed here (please amend to local link as needed):
000
Q8: What is our company’s position on this?
A: Brother take cybersecurity seriously and are actively monitoring the situation. We
recommend all users follow Brother’s guidance and apply the necessary updates. We are
available to support any customers with questions or concerns.
[add local contact details / contact link]
Q13: What is the issue with default passwords on Brother devices?
A: One of the reported vulnerabilities involves the way default admin passwords are generated.
In certain cases, it may be possible for an attacker to predict the default password using publicly
available information. To stay protected, we strongly recommend:
 Changing the default admin password immediately
 Limiting access to the device’s web interface
 Ensuring the device is used within a secure, internal network
Brother has provided firmware updates and guidance to help customers secure their devices
and reduce any potential risk.
Q14: How should we respond to CVE-2024-5178 (An unauthenticated attacker can
generate the device's default administrator password and bypass authentication), which
has been identified as a high-severity vulnerability?
A: We have never recommended using the default password. Please make sure to change the
default administrator password.
Q15: Is this vulnerability specific to Brother devices?

A: No, the vulnerabilities disclosed in this case are not limited to Brother or even to printers.
Similar vulnerabilities have been found in other brands and other types of network-connected
devices — including scanners, multifunction devices, and even IoT hardware. These issues
often stem from insecure default configurations, outdated firmware, or exposed management
interfaces.
Q16: Why did it take approximately one year to address the vulnerability?
A: Since there were many affected models, it took time to develop and evaluate the fixed
firmware, which resulted in the delay.